Matilija Bottled Water

 

Pure Water Systems Brings You Residential, Commercial, Industrial Water Purification and Filtration.

Service Menu

Frequently Asked Questions about water filtration and purification systems.

 

What is Hard Water?

What is Soft Water?

Why do I need salt?

What’s the difference between salt and potassium?

Why does my machine make a scary noise at night like rain/waterfall?

How often is my softener supposed to regenerate?

I have a softener but I suspect I still have hard water?

Can I drink soft water?

What is purified water?

Do you do bottled water?

What is reverse osmosis?

How often do I need a filter change?

Is this Culligan?

Why did you change your name from Culligan?

Why is my hair turning green?
How come my copper plumbing has pin hole leaks?

What is Hard Water?
Water described as "hard" is high in dissolved minerals, specifically calcium, magnesium, and iron. Hard water is a nuisance because of mineral buildup on fixtures, plumbing, appliances, and poor soap and detergent performance. It also contributes to skin and hair problems as well as. If your dishes come out of the dishwasher with a white film; if it takes more then a damp cloth to clean your glass shower doors; if your colored laundry comes out “dull” and whites are a bit gray; if you need products like “Lime-A-Way” then you are literally paying the price for hard water. Santa Barbara has some of the hardest water in the country. Large amounts of magnesium, calcium, and iron can really be detrimental to you plumbing, fixtures, skin, hair, dishes, and clothes in the long run. Water hardness is classified by the U.S. Department of Interior and the Water Quality Association as follows:

Classification

Grains per Gallon

Soft

0–1

Slightly Hard

1–3.5

Moderately Hard

3.5–7.0

Hard

7–10.5

Very Hard

10.5 and up

In Santa Barbara County the water tests at 25 to 38 grains per gallon with areas in Ventura and Oxnard at 26 - 45. This puts us at about 3 - 4 times the national level for very hard water.

What is Soft Water?
Water that has been softened has had the hardness minerals that cause all the problems with your dishes, fixtures, laundry, skin, and hair removed. We offer water softeners that can bring the grains per gallon down to 0. The most common way to soften the water is with an automatic water softener.

Why do I need salt?
Automatic water softeners use salt to “recharge” their ability to soften your water. The main vessel is flushed with salt water, also called “brine”, which removes all the calcium and magnesium that the unit has removed from your water supply. The brine and the hardness minerals are then rinsed out of the unit into a drain. The salt itself is not directly “injected” into the water supply. As a comparison, one slice of white bread has 161 milligrams of sodium; 3/4 cup of canned baked beans = 1130 milligrams. Even a common Alka Seltzer tablet contains 532 milligrams of sodium. However, if you are on a sodium restricted diet, you should consult your doctor about the proper water for drinking. Remember, a reverse osmosis system will remove 99% of the sodium a softener may add.

Initial Hardness

Sodium Added

1.0 grain per Gallon

7.5 mil/quart

5.0 grains per Gallon

37.5 mil/quart

10.0 grains per Gallon

75.0 mil/quart

20.0 grains per Gallon

150.0 mil/quart

40.0 grains per Gallon

300.0 mil/quart

What’s the difference between salt and potassium?
Potassium can be used as a substitute for salt. Potassium is more expensive than salt and is less efficient. Potassium is best used when waste goes to a “grey water system” instead of a sewer, or if a family member is on a sodium restricted diet and they plan on drinking or cooking with softened water.

Top of Page    

Why does my machine make a scary noise at night like rain/waterfall?
The softener makes noise when it regenerates. When the softener regenerates it rinses out all of the bad things it’s pulled out of your water. Your Unit is timed to recharge at night so it can provide you uninterrupted soft water during the day. Most units can also set up the softener to regenerate during the day.

How often is my softener supposed to regenerate?
The softener should regenerates based on your water usage and the physical size of the softener. If you use a lot of water, you should expect your softener to regenerate more frequently (daily to 7 days). If you use very little water, it should regenerate less frequently (10 to 20 days). You should have the system checked periodically to make sure its running efficiently and not wasting salt and water. Free 5-year inspection click here.

Top of Page    

I have a softener but I suspect I still have hard water?
The settings may be incorrect or you may have soft water and are using the wrong cleaning products. Anyone is welcome to stop by our office where we will test your water for free, or call us and we’ll schedule a time to have a technician stop by and examine your softener.

Can I drink soft water?
Most water softeners are not designed to improve the taste or smell of the water. Most customers won’t drink the tap water if it is softened or not. The most important thing to remember is that softened water will have slightly higher sodium or potassium levels then the plain tap water. If you are on a sodium or potassium restricted diet you should use a Reverse Osmosis system for your drinking water or consult with your physician.

Top of Page    

What is purified water?
The term purified water is used to describe water that has had impurities like minerals, salts, bacteria, viruses, and sediment removed. Purified water is measured by ppm, or parts per million. This gives an accurate measure of how much “stuff” is in your water. Santa Barbara county tests at 450ppm – 1100ppm, well above the national average. However, with the right purification process, the ppm can be brought down to the 2ppm - 40ppm range.

Do you do bottled water?
Yes, however most of our customers use reverse osmosis drinking water systems because they end up less expensive and much more convenient than delivering bottled water. Reverse osmosis units can come in a stand-alone dispenser, feed icemakers, and will provide you with a continuous supply of purified water without the hassle of changing bottles.

Top of Page    

What is reverse osmosis?
Reverse osmosis is the finest filtration known. This process will
allow the removal of particles as small as ions from a solution.
Reverse osmosis is used to purify water and remove salts and other
impurities in order to improve the color, taste or properties of the
water. The most common use for reverse osmosis is in purifying water.
It is used to produce water that meets the most demanding
specifications that are currently in place.

How often do I need a filter change?
In a reverse osmosis system there are two types of filters. If you have a high quality unit, the first type is the carbon filters, and those need to be inspected every 18-24 months. The main filter of the unit is the membrane filter and that filter needs to be serviced every two to four years. In a low quality unit the carbon filters need to be changed every 2-6 months and the membrane every year. If you freeze some water and it comes out cloudy, you should have the filters changed. If the taste of the water just doesn’t seem right, the filters should be checked.

Top of Page    

Is this Culligan?
No, we've change our name, but we still service ALL Culligan equipment and honor all the warranties on Culligan equipment we installed. To find out more about our new warranty transfer click here.

Why did you change your name from Culligan?
After Culligan was bought out by the multinational French super conglomerate Vivendi, we saw the quality of their products decline. We decided to drop our franchise in order to improve our ability to provide you with excellent equipment and better local service.

Top of Page

Why is my hair turning green?

High levels of chlorine as well as elevated copper levels in water will cause green hair or hair to turn green.  Although professional stylists can do “green out treatments” they are harsh on the hair and are costly.  Testing for copper and chlorine is relatively straight forward and inexpensive, if copper and or chlorine are detected they are usually easy to fix. Check out our Copper Gladiator.


How come my plumbing has pin hole leaks ?

A pinhole leaks in copper plumbing is an indication that there may be galvanic corrosion or electrolysis occurring and dissolving your plumbing.  Testing for elevated copper levels and checking for proper grounding is a good place to start.  In addition to pinhole leaks, customers with this problem may experience a green tint to their hair.  This problem is more noticeable for both natural and assisted blondes and silvers; it is best to fix the problem and not just “go brunette” as some husbands may recommend.  This is much more than a hair color issue. The Copper Gladiator may be your answer.

 

The Central Coast: Malibu, Port Hueneme, Thousand Oaks, Simi Valley, Westlake Village, Camarillo, Ventura, Ojai, Oxnard, La Conchita, and Rincon Point, have some of the most beautiful homes, apartment buildings, and condominiums. Unfortunately, we have extremely hard water creating cloudy glasses, bad hair days and clothes that just never seem clean. We carry several different types of water softeners, water conditioners, and water filters in stock for rental or purchase. A soft water system will save you thousands of dollars every year by protecting all of your water using appliances and plumbing. Not only will you protect your home you will use up to 80% less cleaning products and reduce cleaning time. The time is now! Upgrade and old water softener, water conditioner, water filter, or reverse osmosis system… Save water, time, money, and the environment!

 

Top of Page

 

 
 
 

© 2002 Pure Water Systems - All Rights Reserved Home Page